419-269-2000
10559 Geiser Road
Holland, OH 43528

Machine Information

4-1/8" CARSON MODEL #CHP-1H-72 HYDRAULIC TUBE PUNCH: STOCK #15807

Stock #: 15807

Equipped With

SERIAL .................. 130401
MODEL ................... CHP-1H X 72"
TUBE CAPACITY ........... 4-1/8" DIA 
MAX LENGTH .............. 72"


END PUNCHING MACHINES
Carson Engineering builds a line of hole punching equipment for the production of header tubes. These machines come in two basic versions, manually operated and semi-automatic.

MODEL CHP-1H AND MODEL CHP-1MP TUBE PUNCH MACHINES

These are manually loaded and operated machines. Model CHP-1H is hydraulic powered, while the Model CHP-1MP is pneumatically powered and controlled.
Carson punch machines all produce flat holes, punching from the outside to the inside of the tube. There are many advantages to this process of hole-making, the two most important are speed and cleanliness. This process produces a slug as waste rather than chips, no lubricant is required. These machines are fast and accurate and widely used in the HVAC industry, the machine shown below is CHP-1H.

FEATURES AND SPECIFICATIONS OF MODEL CHP-1H AND MODEL CHP-1MP PUNCHERS

Buy Machines

4-1/8" CARSON MODEL #CHP-1H-72 HYDRAULIC TUBE PUNCH: STOCK #15807

Stock # 15807

Share Machine
Print Details

Machine Specifications

SERIAL .................. 130401
MODEL ................... CHP-1H X 72"
TUBE CAPACITY ........... 4-1/8" DIA 
MAX LENGTH .............. 72"


END PUNCHING MACHINES
Carson Engineering builds a line of hole punching equipment for the production of header tubes. These machines come in two basic versions, manually operated and semi-automatic.

MODEL CHP-1H AND MODEL CHP-1MP TUBE PUNCH MACHINES

These are manually loaded and operated machines. Model CHP-1H is hydraulic powered, while the Model CHP-1MP is pneumatically powered and controlled.
Carson punch machines all produce flat holes, punching from the outside to the inside of the tube. There are many advantages to this process of hole-making, the two most important are speed and cleanliness. This process produces a slug as waste rather than chips, no lubricant is required. These machines are fast and accurate and widely used in the HVAC industry, the machine shown below is CHP-1H.

FEATURES AND SPECIFICATIONS OF MODEL CHP-1H AND MODEL CHP-1MP PUNCHERS

  • Standard bed lengths of 30”, 48”, 72” and 96”, special lengths are also available
  • CHP-1MP has capacity of 2 5/8” O.D. tube
  • CHP-1H has capacity of 4 1/8” O.D. tube, machines for larger tubes can also be produced
  • Easy to change tooling and setup
  • Safe to operate
  • Simple, versatile template system for linear locations, indexable tube carriage for radial locations
  • Accurate and repeatable hole location
  • Standard colors are Carson Green and Safety Blue

Specifications

Let's Talk