- Se Habla Espanol
- 844-4YoBros
- 419-269-2000
- Email Us
|
419-269-2000 |
Stock #: 18617
2020 Lagun MVM-2 Megamill Vertical Mill
SERIAL 1920437
YEAR NEW 2020
SPECIFICATIONS:
Table:
Table size 50” x 10” (1,270 x 254 mm)
T-slots 3 on 2.5” centers (3 on 64 mm)
T-slot size 5/8” (16 mm)
Maximum weight on table 661 lbs. (300 kg)
Travels:Table travel X-axis, manual/ with power feed 35” / 32” (890 / 810 mm)
(Depending on power feed)
Cross travel, Y axis 16” (406 mm)
Knee travel, Z axis 16” (406 mm)
Ram travel 22.04” (560 mm)
Head:
Main motor 3 HP (2.24 kW)
Mechanical Infinite variable speed with (High-Low) manual settings
(60 HZ) 60 to 4500 RPM. Low (60 to 500 RPM); High (500 to
4500 RPM). (Opt. Electronic Variable Speed- 0 to 4,500)
Head swivel (Left to right) +/- 90°
Head tilt +/- 45°
Distance, spindle to column 6.25” to 28” (159 to 719 mm)
Distance, spindle to table 4 to 20” (100 to 506 mm)
Quill:
Power quill feeds .0015, .003, .006 in./rev (.038;.076;.015mm/rev)
Spindle taper R-8 (Opt. #40 NST)
Quill diameter 3.38” (85.73 mm)
Quill travel 5” (127 mm)
Machine Constructive Dimensions:
Column turret diameter (graduated) 15” (380 mm)
Knee width 13.77” (350 mm)
Knee to column bearing length 31.49” (800 mm)
Saddle & table bearing length 20.07” (510 mm)
Ram & turret bearing length 17.71” (450 mm)
Ram length 32.82” (835 mm)
Physical:
Weight 2,645 lbs. (1,200 kg)
Height 83.46” (2,120 mm)
Width 65.59” (1,666 mm)
Depth 78.11” (1,984 mm)
Power, Dual Voltage Motors 230/440 Volts
EQUIPPED WITH:
Lagun Lightning X, Y, Knee Power Feeds
Newall DP700 Digital Read Out
Variable Speed Head (4,500 RPM Max)
Lower Chip Pan
One Shot Lube
Stock # 18617
2020 Lagun MVM-2 Megamill Vertical Mill SPECIFICATIONS: Table: Table size 50” x 10” (1,270 x 254 mm) T-slots 3 on 2.5” centers (3 on 64 mm) T-slot size 5/8” (16 mm) Maximum weight on table 661 lbs. (300 kg) Travels:Table travel X-axis, manual/ with power feed 35” / 32” (890 / 810 mm) (Depending on power feed) Cross travel, Y axis 16” (406 mm) Knee travel, Z axis 16” (406 mm) Ram travel 22.04” (560 mm) Head: Main motor 3 HP (2.24 kW) Mechanical Infinite variable speed with (High-Low) manual settings (60 HZ) 60 to 4500 RPM. Low (60 to 500 RPM); High (500 to 4500 RPM). (Opt. Electronic Variable Speed- 0 to 4,500) Head swivel (Left to right) +/- 90° Head tilt +/- 45° Distance, spindle to column 6.25” to 28” (159 to 719 mm) Distance, spindle to table 4 to 20” (100 to 506 mm) Quill: Power quill feeds .0015, .003, .006 in./rev (.038;.076;.015mm/rev) Spindle taper R-8 (Opt. #40 NST) Quill diameter 3.38” (85.73 mm) Quill travel 5” (127 mm) Machine Constructive Dimensions: Column turret diameter (graduated) 15” (380 mm) Knee width 13.77” (350 mm) Knee to column bearing length 31.49” (800 mm) Saddle & table bearing length 20.07” (510 mm) Ram & turret bearing length 17.71” (450 mm) Ram length 32.82” (835 mm) Physical: Weight 2,645 lbs. (1,200 kg) Height 83.46” (2,120 mm) Width 65.59” (1,666 mm) Depth 78.11” (1,984 mm) Power, Dual Voltage Motors 230/440 Volts EQUIPPED WITH: Lagun Lightning X, Y, Knee Power Feeds Newall DP700 Digital Read Out Variable Speed Head (4,500 RPM Max) Lower Chip Pan One Shot Lube
SERIAL 1920437
YEAR NEW 2020
| Specifications |
|---|
