419-269-2000
10559 Geiser Road
Holland, OH 43528

Machine Information

60" x 0.064" x 20,000 LB Iowa Precision Slear Line: STOCK 17023

Stock #: 17023

Equipped With

SERIAL #: L4529C     
YEAR: 2004
 
-Model Number:                      Iowa Precision Slear 1 
-Materials:                         CRS, Alum, Galv, Pre-Paint 
-Min./Max. Coil Width:              6" - 60" 
-Thickness Range:                   0.015" - 0.064" 
-Maximum Shear:                     45,000 PSI 
-Maximum Yield:                     45,000 PSI 
-Maximum Coil Weight:               20,000# 
-Coil I.D.:                         20" - 24" (Nominal) 
-Maximum Coil O.D.:                 64" 
-Slitting Capacity:                 Five (5) Cuts of 0.060"/Six (6) Cuts of 0.045" 
-Minimum Slit Width:                3" 
-Line Direction:                    Right to Left 
-Stacker Length:                    1 - 12' 
-Maximum Bundle:                    18" x 10,000# @ 12' 
-Mode of Operation:                 Front Loop 
-Line Speed:                        20 - 200 FPM / 20-150 FPM (using Scrap Winders) 
-Required Area:                     20' x 70' 
-Required Power:                    160 Amps 
 
Consisting of the following:
 
-Entry Turnstile:
  Four (4) Arms x 20,000# per arm 
  Powered Rotation 
  Slotted for C-Hook 
 
-Entry Coil Car:
  Low Boy Type 
  Floor Mounted 
  Powered Lift and Traverse 
 
-Uncoiler:
  Mandrel Type 
  Powered Expansion 
  Feedup Drive 
  Holddown with Powered Snubber 
  Loop Control with Dancer Arm 
  Self Contained Hydraulic Unit 
 
-Entry Unit:
  Extending Blade Peeler 
  Powered Entry Pinch Roll 
  Manual Side Guides 
 
-Pit Section:
  Entry/Exit Cascade Rolls with Cross Over Tables 
  Sonic Loop Control 
  Manual Side Guides 
 
-Slear Unit:
  Powered Entry Pinch Rolls 
  Slitter Head with Hub Type Tooling (5" Diameter Arbor) 
  Fifteen (15) Slitter Knives 
  Powered Pinch Rolls #2 
  Flattener with Six (6) Work Rolls in a 3/3 Configuration 
  Powered Exit Pinch Rolls 
  Down Cut Shear on Traversing Track (Single Rake Blade) 
  One (1) Spare Set of Shear Blades 
 
-Two (2) Scrap Winders:
  Minimum/Maximum Scrap Width:  0.250" - 1" 
  Level Wind 
  Automatic Scrap Dump 
 
-Stacker (New in 2013):
  Manual Adjustable End Stop 
  Manual Adjustable Side Tampers 
  Avon Scissor Lift Table with Powered Roller Conveyor Top 
  Three (3) Sheet Tampers 
  Five (5) Blank Dividers 
  Lift Table with Powered Conveyor Top 
 
-Powered Side Discharge Conveyor (New in 2013):
  12' Length 
  20,000# Capacity 
  Twin Powered Rubber Belts 
 
-Electronics:
  Main Operators Console with Allen Bradley Touch Screen and PLC 
  Aux. Control Consoles 
  AC/DC Cabinet 
 

Buy Machines

60" x 0.064" x 20,000 LB Iowa Precision Slear Line: STOCK 17023

Stock # 17023

Share Machine
Print Details

Machine Specifications

SERIAL #: L4529C     
YEAR: 2004
 
-Model Number:                      Iowa Precision Slear 1 
-Materials:                         CRS, Alum, Galv, Pre-Paint 
-Min./Max. Coil Width:              6" - 60" 
-Thickness Range:                   0.015" - 0.064" 
-Maximum Shear:                     45,000 PSI 
-Maximum Yield:                     45,000 PSI 
-Maximum Coil Weight:               20,000# 
-Coil I.D.:                         20" - 24" (Nominal) 
-Maximum Coil O.D.:                 64" 
-Slitting Capacity:                 Five (5) Cuts of 0.060"/Six (6) Cuts of 0.045" 
-Minimum Slit Width:                3" 
-Line Direction:                    Right to Left 
-Stacker Length:                    1 - 12' 
-Maximum Bundle:                    18" x 10,000# @ 12' 
-Mode of Operation:                 Front Loop 
-Line Speed:                        20 - 200 FPM / 20-150 FPM (using Scrap Winders) 
-Required Area:                     20' x 70' 
-Required Power:                    160 Amps 
 
Consisting of the following:
 
-Entry Turnstile:
  Four (4) Arms x 20,000# per arm 
  Powered Rotation 
  Slotted for C-Hook 
 
-Entry Coil Car:
  Low Boy Type 
  Floor Mounted 
  Powered Lift and Traverse 
 
-Uncoiler:
  Mandrel Type 
  Powered Expansion 
  Feedup Drive 
  Holddown with Powered Snubber 
  Loop Control with Dancer Arm 
  Self Contained Hydraulic Unit 
 
-Entry Unit:
  Extending Blade Peeler 
  Powered Entry Pinch Roll 
  Manual Side Guides 
 
-Pit Section:
  Entry/Exit Cascade Rolls with Cross Over Tables 
  Sonic Loop Control 
  Manual Side Guides 
 
-Slear Unit:
  Powered Entry Pinch Rolls 
  Slitter Head with Hub Type Tooling (5" Diameter Arbor) 
  Fifteen (15) Slitter Knives 
  Powered Pinch Rolls #2 
  Flattener with Six (6) Work Rolls in a 3/3 Configuration 
  Powered Exit Pinch Rolls 
  Down Cut Shear on Traversing Track (Single Rake Blade) 
  One (1) Spare Set of Shear Blades 
 
-Two (2) Scrap Winders:
  Minimum/Maximum Scrap Width:  0.250" - 1" 
  Level Wind 
  Automatic Scrap Dump 
 
-Stacker (New in 2013):
  Manual Adjustable End Stop 
  Manual Adjustable Side Tampers 
  Avon Scissor Lift Table with Powered Roller Conveyor Top 
  Three (3) Sheet Tampers 
  Five (5) Blank Dividers 
  Lift Table with Powered Conveyor Top 
 
-Powered Side Discharge Conveyor (New in 2013):
  12' Length 
  20,000# Capacity 
  Twin Powered Rubber Belts 
 
-Electronics:
  Main Operators Console with Allen Bradley Touch Screen and PLC 
  Aux. Control Consoles 
  AC/DC Cabinet 
 

Specifications

Let's Talk