46" BULLARD / CENTROID CNC VERTICAL TURRET LATHE, FULL CNC RETROFIT IN 2016: STOCK #11380

Stock #: 11380

Equipped With

SERIAL ........................... 3069
MODEL ............................ 46" DYN-AU-TAPE
YEAR NEW ......................... 1985
RETROFITTED IN ................... 2016
CNC CONTROLS ..................... CENTROID CONTROLS
REPLACED IN RETROFIT ............. DRIVES, SERVOS & ELECTRONICS
TOOL CHANGER ..................... 20 STATION

TABLE DIAMETER ................... 46" 4-JAW CHUCK
MAXIMUM SWING .................... 49" W/SIDE HEAD IN WORKING POSITION
MAXIMUM SWING .................... 58" W/SIDE HEAD BELOW TABLE TOP
HEIGHT UNDER RAIL ................ 40"
RAIL ADJUSTMENT .................. 30"
TABLE SPEEDS ..................... (20) 6.83 TO 250 RPM
FEEDS: ........................... .001" TO .250" PER/REV
VERTICAL TRAVEL OF TURRET ........ 26" VERTICAL
TURRET TRAVEL ON RAIL ............ RIGHT 31" & LEFT 34-1/2"
TURRET SWIVEL .................... 30 DEGREES, RIGHT OR LEFT
SIDE HEAD TRAVELS ................ 38-3/4" VERTICAL & 23-3/4" HORIZONTAL
5-POSITION TURRET HEAD ON RAIL ... YES
EQUIPPED WITH TDA (THREAD CUTTING, DRUM SCORING, ANGLE TURNING)
4-POSITION TOOL POST ON SIDE HEAD. YES
RAPID TRAVERSE ALL DIRECTIONS .... YES
AUTOMATIC LUBRICATION ............ YES
MOTOR ............................ 100 HORSEPOWER

Buy Machines

46" BULLARD / CENTROID CNC VERTICAL TURRET LATHE, FULL CNC RETROFIT IN 2016: STOCK #11380

Stock # 11380

Share Machine
Print Details

Machine Specifications

SERIAL ........................... 3069
MODEL ............................ 46" DYN-AU-TAPE
YEAR NEW ......................... 1985
RETROFITTED IN ................... 2016
CNC CONTROLS ..................... CENTROID CONTROLS
REPLACED IN RETROFIT ............. DRIVES, SERVOS & ELECTRONICS
TOOL CHANGER ..................... 20 STATION

TABLE DIAMETER ................... 46" 4-JAW CHUCK
MAXIMUM SWING .................... 49" W/SIDE HEAD IN WORKING POSITION
MAXIMUM SWING .................... 58" W/SIDE HEAD BELOW TABLE TOP
HEIGHT UNDER RAIL ................ 40"
RAIL ADJUSTMENT .................. 30"
TABLE SPEEDS ..................... (20) 6.83 TO 250 RPM
FEEDS: ........................... .001" TO .250" PER/REV
VERTICAL TRAVEL OF TURRET ........ 26" VERTICAL
TURRET TRAVEL ON RAIL ............ RIGHT 31" & LEFT 34-1/2"
TURRET SWIVEL .................... 30 DEGREES, RIGHT OR LEFT
SIDE HEAD TRAVELS ................ 38-3/4" VERTICAL & 23-3/4" HORIZONTAL
5-POSITION TURRET HEAD ON RAIL ... YES
EQUIPPED WITH TDA (THREAD CUTTING, DRUM SCORING, ANGLE TURNING)
4-POSITION TOOL POST ON SIDE HEAD. YES
RAPID TRAVERSE ALL DIRECTIONS .... YES
AUTOMATIC LUBRICATION ............ YES
MOTOR ............................ 100 HORSEPOWER

Specifications

Let's Talk