Stock #: 12056
MAXIMUM SPECIFICATIONS (rated on mild steel)Punching (88 Tons)1-1/16” diameter through 1” plateThroat Depth9”Bending (Optional)24”, 36”, 48” w/4-way die blockRound Bar Shear1/4" through 1-1/2"Square Bar Shear1/2” through 1”Flat Bar Shear8” x 3/4”, 12” x 5/8”, 24” x 1/4”Angle Shear5” x 5” x 3/8”Coping/Notching2-3/4” x 4” x 1/4”Motor10 HPWeight4,700 Lbs.STANDARD EQUIPMENTAutomatic Hold Down Coupling WrenchPunch Holder, Stripper, & Die Block Chip Bucket5 Punch & Die Sets 9/16” through 1-1/16” Extra Filter ElementSet of Angle Knives Two (2) Foot SwitchesSet 1” Round Bar Knives Instruction/Parts Book/Video LinkSet of 20-5/8” Plate Shear Knives Set of Coper KnivesSTANDARD FEATURES1. Mechanical Stripper Attachment- keeps material flat through the punching process, eliminating distortion. The shorter required stroke gives you a faster punching cycle.2. Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle.3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades.5. Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing distortion giving you a higher quality cut.6. Coper Notcher- the low rake angle keeps part flat and under control during notching.
WARRANTYTwelve (12) months, covering parts against defects in materials or workmanship.
Stock # 12056