2020 PIRANHA 65 TON MODEL #P-65 HYDRAULIC IRONWORKER **NEW**: STOCK 12055

Stock #: 12055

Equipped With

Punching (65 Tons)
1-1/16” diameter through 3/4” plate
Throat Depth
8”
Bending (Optional)
8” up to 24” w/4-way die block
Round Bar Shear
1/4” through 1-1/2”
Square Bar Shear
1/2” through 1”
Flat Bar Shear
15” x 5/8”, 10” x 3/4”
Angle Shear
5” x 5” x 3/8”
Coping/Notching
2-3/4” x 4” x 1/4”
Motor
7.5 HP
Weight
2,600 Lbs.

STANDARD EQUIPMENT
Automatic Hold Down Coupling Wrench
Punch Holder, Stripper, & Die Block 3/8” Allen Wrench
5 Punch & Die Sets 9/16” through 1-1/16” Set of Chip Buckets
Set of Angle Knives Extra Filter Element
Set 1” Round Bar Knives Foot Switch
Set of 12-1/8” Plate Shear Knives Instruction/Parts Book/Video Link
Set of Coper Knives

STANDARD FEATURES
1. Urethane Stripper Attachment- keeps material flat through the punching process, eliminating distortion. The shorter required stroke gives you a faster punching cycle.
2. Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle.
3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.
4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades.
5. Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing distortion giving you a higher quality cut.
6. Coper Notcher- the low rake angle keeps part flat and under control during notching.
7. Quick Change Tooling– the unique Piranha dovetail design allows for quick installation and removal of all standard and optional tools.

DELIVERY
Normal delivery is from stock subject to confirmation at the time of order. Price is ExWorks factory
Rockford, Illinois and does not include any applicable sales tax or installation. Up to twelve gallons of ISO Grade 32
hydraulic oil is required. The machine is shipped totally wired through the electrical enclosure box. It has been left
to the purchaser’s discretion whether to wire direct to a disconnect or to install a cord and plug for mobility.
SHIPMENT REQUIREMENTS
MegaFab requires Flatbed Trailer(s), with adequate Chains and tarps (to cover full height and width), to assure
protection of this equipment when using truck transportation. Please make sure that adequate deck space is
allotted for machine and all accessories shipping with order. Upon request, MegaFab will arrange shipping to
destination. Freight and insurance charges are the responsibility of the customer, and will be invoiced on
machine order. Please consult the factory for any questions regarding shipping requirements.
WARRANTY
Twelve (12) months, covering parts against defects in materials or workmanship.

Buy Machines

2020 PIRANHA 65 TON MODEL #P-65 HYDRAULIC IRONWORKER **NEW**: STOCK 12055

Stock # 12055

Share Machine
Print Details
8acb1ff404934847c541dd7ca4e9e963-78c179d10009a015bda6d2372906ad11.jpeg
Download Images

Machine Specifications

Punching (65 Tons)
1-1/16” diameter through 3/4” plate
Throat Depth
8”
Bending (Optional)
8” up to 24” w/4-way die block
Round Bar Shear
1/4” through 1-1/2”
Square Bar Shear
1/2” through 1”
Flat Bar Shear
15” x 5/8”, 10” x 3/4”
Angle Shear
5” x 5” x 3/8”
Coping/Notching
2-3/4” x 4” x 1/4”
Motor
7.5 HP
Weight
2,600 Lbs.

STANDARD EQUIPMENT
Automatic Hold Down Coupling Wrench
Punch Holder, Stripper, & Die Block 3/8” Allen Wrench
5 Punch & Die Sets 9/16” through 1-1/16” Set of Chip Buckets
Set of Angle Knives Extra Filter Element
Set 1” Round Bar Knives Foot Switch
Set of 12-1/8” Plate Shear Knives Instruction/Parts Book/Video Link
Set of Coper Knives

STANDARD FEATURES
1. Urethane Stripper Attachment- keeps material flat through the punching process, eliminating distortion. The shorter required stroke gives you a faster punching cycle.
2. Automatic Urethane Hold-downs- clamps and releases material automatically with each stroke. Part movement is eliminated by clamping the part throughout the entire shearing cycle.
3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately line up cuts to the shear blades.
4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts. Shear blades have four useable edges giving you a longer life and less expensive blades.
5. Angle Shear- the floating upper blade seats in the center of the angle prior to cutting minimizing distortion giving you a higher quality cut.
6. Coper Notcher- the low rake angle keeps part flat and under control during notching.
7. Quick Change Tooling– the unique Piranha dovetail design allows for quick installation and removal of all standard and optional tools.

DELIVERY
Normal delivery is from stock subject to confirmation at the time of order. Price is ExWorks factory
Rockford, Illinois and does not include any applicable sales tax or installation. Up to twelve gallons of ISO Grade 32
hydraulic oil is required. The machine is shipped totally wired through the electrical enclosure box. It has been left
to the purchaser’s discretion whether to wire direct to a disconnect or to install a cord and plug for mobility.
SHIPMENT REQUIREMENTS
MegaFab requires Flatbed Trailer(s), with adequate Chains and tarps (to cover full height and width), to assure
protection of this equipment when using truck transportation. Please make sure that adequate deck space is
allotted for machine and all accessories shipping with order. Upon request, MegaFab will arrange shipping to
destination. Freight and insurance charges are the responsibility of the customer, and will be invoiced on
machine order. Please consult the factory for any questions regarding shipping requirements.
WARRANTY
Twelve (12) months, covering parts against defects in materials or workmanship.

Specifications

Let's Talk