2019 PIRANHA 50 TON MODEL #P-50 HYDRAULIC IRONWORKER **NEW**: STOCK 12054

Stock #: 12054

Equipped With

Punching (50 Tons) 13/16” diameter through 3/4” plate
Throat Depth 5”
Bending (Optional) 6” up to 12” w/4-way die block
Round Bar Shear 1/4” through 1-3/8”
Square Bar Shear 1/2” through 1”
Flat Bar Shear 12" x 3/8", 10" x 1/2”, 6” x 3/4”
Angle Shear 3” x 3” x 3/8”
Coping/Notching 2-1/4” x 3” x 1/4”
Motor 3 HP, 3 Phase
Weight 1,700 Lbs.

STANDARD EQUIPMENT
Mechanical Hold Down Coupling Wrench
Punch Holder, Urethane Stripper, & Die Block 1/2” Allen Wrench
Set of Angle Knives Foot Switch
Set of Coper Knives Set of 13” Plate Shear Knives
Instruction/Parts Book/Video Link

STANDARD FEATURES
1. Urethane Stripper Attachment- keeps material flat through the punching process, eliminating
distortion. The shorter required stroke gives you a faster punching cycle.
2. Mechanical Shear Hold-downs- clamps material at change of material thickness. Part movement
is eliminated by clamping the part throughout the entire shearing cycle.
3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately
line up cuts to the shear blades.
4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts.
Shear blades have four useable edges giving you a longer life and less expensive blades.
5. Angle Shear- the square upper angle knife has four cutting radiuses to better fit the angle being
sheared, giving you lower distortion and a higher quality cut.
6. Coper Notcher- the low rake angle blade keeps part flat and under control during notching.

DELIVERY
Normal delivery is from stock subject to confirmation at the time of order. Price is ExWorks factory
Rockford, Illinois and does not include any applicable sales tax or installation. Up to twelve gallons of ISO Grade 32
hydraulic oil is required. The machine is shipped totally wired through the electrical enclosure box. It has been left
to the purchaser’s discretion whether to wire direct to a disconnect or to install a cord and plug for mobility.
SHIPMENT REQUIREMENTS
MegaFab requires Flatbed Trailer(s), with adequate Chains and tarps (to cover full height and width), to assure
protection of this equipment when using truck transportation. Please make sure that adequate deck space is
allotted for machine and all accessories shipping with order. Upon request, MegaFab will arrange shipping to
destination. Freight and insurance charges are the responsibility of the customer, and will be invoiced on
machine order. Please consult the factory for any questions regarding shipping requirements.
WARRANTY
Twelve (12) months, covering parts against defects in materials or workmanship.

Buy Machines

2019 PIRANHA 50 TON MODEL #P-50 HYDRAULIC IRONWORKER **NEW**: STOCK 12054

Stock # 12054

Share Machine
Print Details
82a923e444bfce561988171d390e159b-a3fd0e53ddfdf9e57003cf9e036b2afc.jpeg
Download Images

Machine Specifications

Punching (50 Tons) 13/16” diameter through 3/4” plate
Throat Depth 5”
Bending (Optional) 6” up to 12” w/4-way die block
Round Bar Shear 1/4” through 1-3/8”
Square Bar Shear 1/2” through 1”
Flat Bar Shear 12" x 3/8", 10" x 1/2”, 6” x 3/4”
Angle Shear 3” x 3” x 3/8”
Coping/Notching 2-1/4” x 3” x 1/4”
Motor 3 HP, 3 Phase
Weight 1,700 Lbs.

STANDARD EQUIPMENT
Mechanical Hold Down Coupling Wrench
Punch Holder, Urethane Stripper, & Die Block 1/2” Allen Wrench
Set of Angle Knives Foot Switch
Set of Coper Knives Set of 13” Plate Shear Knives
Instruction/Parts Book/Video Link

STANDARD FEATURES
1. Urethane Stripper Attachment- keeps material flat through the punching process, eliminating
distortion. The shorter required stroke gives you a faster punching cycle.
2. Mechanical Shear Hold-downs- clamps material at change of material thickness. Part movement
is eliminated by clamping the part throughout the entire shearing cycle.
3. Visibility- a direct line of sight over the hold down bar allows the operator to easily and accurately
line up cuts to the shear blades.
4. Flat Bar Shear- the low rake angle shear design results in flatter and higher quality sheared parts.
Shear blades have four useable edges giving you a longer life and less expensive blades.
5. Angle Shear- the square upper angle knife has four cutting radiuses to better fit the angle being
sheared, giving you lower distortion and a higher quality cut.
6. Coper Notcher- the low rake angle blade keeps part flat and under control during notching.

DELIVERY
Normal delivery is from stock subject to confirmation at the time of order. Price is ExWorks factory
Rockford, Illinois and does not include any applicable sales tax or installation. Up to twelve gallons of ISO Grade 32
hydraulic oil is required. The machine is shipped totally wired through the electrical enclosure box. It has been left
to the purchaser’s discretion whether to wire direct to a disconnect or to install a cord and plug for mobility.
SHIPMENT REQUIREMENTS
MegaFab requires Flatbed Trailer(s), with adequate Chains and tarps (to cover full height and width), to assure
protection of this equipment when using truck transportation. Please make sure that adequate deck space is
allotted for machine and all accessories shipping with order. Upon request, MegaFab will arrange shipping to
destination. Freight and insurance charges are the responsibility of the customer, and will be invoiced on
machine order. Please consult the factory for any questions regarding shipping requirements.
WARRANTY
Twelve (12) months, covering parts against defects in materials or workmanship.

Specifications

Let's Talk